The post-midterm tech policy environment in 2026 means security threats are evolving much faster than any legislative response can keep up with. Having strong cybersecurity best practices isn’t just a good idea. It’s the only way to protect sensitive data and maintain operations against attacks that get more sophisticated by the day. So, what can organizations actually do to fortify their defenses in this environment?
Key Takeaways
- Get multi-factor authentication (MFA) on everything. Specifically, use adaptive MFA solutions like Duo Security that can apply risk-based access controls on the fly.
- Run quarterly vulnerability assessments with tools like Tenable.io, and have a hard rule to remediate critical weaknesses within 72 hours of finding them.
- Train all your people annually on how to spot phishing and social engineering. Back this up with monthly simulated phishing campaigns from a platform like KnowBe4 to keep them sharp.
- Build and test an incident response plan (IRP). You need a documented process to contain a breach, eradicate the threat, recover, and do a post-mortem within 24 hours of detection.
- Encrypt all your data. Use AES-256 for data at rest (storage) and TLS 1.3 for data in transit (network traffic), paying special attention to anything sitting in the cloud.
1. Mandate Adaptive Multi-Factor Authentication (MFA) for All Access Points
Strong authentication is your first line of defense against unauthorized access. Simple passwords just don’t cut it anymore, the Verizon Data Breach Investigations Report 2025 showed that compromised credentials were a factor in over 80% of web application breaches. This is why implementing adaptive MFA is so important. It’s more than basic two-factor. Adaptive MFA uses contextual data like user location, device health, and login behavior to decide how much authentication is needed for any given access attempt.
For example, if someone tries to log in from a weird location or an unenrolled device, the system can prompt for another verification factor beyond the usual push notification. Tools like Duo Security or Microsoft Entra ID (what used to be Azure AD) Conditional Access let you build granular policies around these risk factors. In Duo, you’d go to “Policies” > “Authentication Policy” and set rules that demand a second factor for any login coming from outside your corporate IP range or trying to access something critical like the finance systems. In Microsoft Entra ID, you do this by setting up Conditional Access policies under “Protection” > “Conditional Access,” where you can enforce MFA for certain cloud apps, user groups, and device states.
Pro Tip: Implement Passwordless Authentication Where Possible
You should really consider moving to passwordless authentication with FIDO2 security keys or biometrics that are already part of your MFA solution. This gets rid of the password entirely, which is the weakest link, and drastically cuts down on how often phishing attacks succeed. The National Institute of Standards and Technology (NIST) has been pushing for stronger authentication for a long time, and FIDO2 fits their recommendations perfectly.
Common Mistake: Inconsistent MFA Enforcement
A lot of people make the mistake of only applying MFA to a few critical systems, which just leaves other apps and services wide open. Attackers always look for the easiest way in. You have to protect every single access point, from email and VPNs to all your SaaS applications.
2. Conduct Continuous Vulnerability Management and Penetration Testing
You need to find your weaknesses before an attacker does. That means doing regular vulnerability scanning and periodic penetration testing. Vulnerability scans with tools like Tenable.io or Qualys should be running at least quarterly (if not all the time) across your entire infrastructure, including your cloud accounts. These scans are great for finding known vulnerabilities in operating systems, apps, and network gear.
Once a scan finishes, you have to prioritize what to fix based on the CVSS score and how it could impact the business. Anything critical (CVSS 9.0+) needs to be patched or mitigated inside of 72 hours. No exceptions. High-severity issues (CVSS 7.0-8.9) should be handled within a week. But automated scanning isn’t enough. You should also hire third-party security firms for annual penetration tests. These simulated attacks show you how well you can stand up to a real-world threat, and they often find business logic flaws and weird misconfigurations that automated scanners completely miss. A good pen test report gives you clear, actionable steps, often showing the exact path an attacker took.
Pro Tip: Bug Bounty Programs
If you already have a mature security program, think about starting a bug bounty program. Platforms like HackerOne can connect you with ethical hackers who will find and report vulnerabilities for a reward, giving you a constant source of real-world testing.
Common Mistake: Focusing Only on External Assets
Too many organizations forget to run scans and tests on their internal network because they assume their perimeter defenses are good enough. That’s a huge blind spot. Insider threats, whether they’re on purpose or accidental, start inside your network which makes internal vulnerability management just as important.
3. Implement Strong Endpoint Detection and Response (EDR) Solutions
Your endpoints (laptops, servers, etc.) are often where a compromise begins. Traditional antivirus just looks for known malware signatures and can’t keep up with polymorphic malware or fileless attacks. Modern Endpoint Detection and Response (EDR) solutions are way more effective because they continuously monitor what’s happening on an endpoint, collect all that telemetry data, and use behavioral analytics to spot suspicious patterns.
Products like CrowdStrike Falcon Insight or SentinelOne Singularity XDR give you real-time visibility into every process, network connection, and file change on your endpoints. They can automatically isolate a threat, roll back malicious changes, and give you all the forensic data you need for analysis. You should configure your EDR agent to run in a “prevent” mode whenever you can, which automatically blocks known bad stuff, but you always need a “detect and respond” capability for the unknown threats that will inevitably get through. Make it a habit to regularly review the EDR console for alerts and investigate anything that looks off.
Pro Tip: Integrate EDR with SIEM
For better threat correlation and a single place to see all your logs, integrate your EDR with a SIEM (Security Information and Event Management) system like Splunk or Elastic Security. This gives you a much more complete picture of security events across your entire environment.
Common Mistake: Alert Fatigue
If your EDR rules are too sensitive, you’ll drown your security team in low-priority alerts, and they’ll start ignoring everything. This “alert fatigue” is a real problem. You have to fine-tune your rules and use threat intelligence feeds to help prioritize the alerts that actually need a human to look at them.
4. Develop and Practice a Complete Incident Response Plan (IRP)
Let’s be real: breaches are going to happen. A well-defined and regularly practiced Incident Response Plan (IRP) is what will minimize the damage and get you back up and running quickly. Your IRP needs to spell out exactly who does what and the procedures for every stage of an incident: preparation, identification, containment, eradication, recovery, and the lessons learned afterward.
The 2025 IBM Security X-Force report shows the average cost of a data breach keeps climbing, which means a fast response is everything. Your plan has to detail how you’ll communicate, both internally and with outsiders like legal counsel, regulators, and customers. You should be running tabletop exercises and live drills for different attack scenarios (think ransomware or data exfiltration) at least twice a year. These drills are the only way to find the gaps in your plan and make sure your team can actually execute it when the pressure is on. And document everything, from the first alert in your EDR to the final recovery step.
Pro Tip: Immutable Backups
Make sure your backup strategy includes immutable backups stored offline or in a secure, air-gapped cloud environment. This is your get-out-of-jail-free card for ransomware since the attackers can’t encrypt or delete these backups, giving you a clean recovery point.
Common Mistake: Neglecting Post-Incident Review
After you’ve cleaned up a mess, you have to do a thorough post-mortem analysis. Find the root cause, figure out what went well and what didn’t, and then use that information to update your IRP and your security controls. This constant feedback loop is how you actually get stronger over time.
5. Implement Data Encryption for All Sensitive Information
Encryption adds a fundamental layer of protection for sensitive information, whether it’s sitting on a drive or flying across the network. If an attacker gets into your systems, encrypted data is just useless gibberish without the decryption key. For data at rest (on servers, databases, laptops, cloud storage), you have to use strong encryption like AES-256. Full disk encryption (FDE) on all endpoints and server volumes is the absolute minimum baseline.
For data in transit (web traffic, email, VPNs), make sure every connection uses a secure protocol like TLS 1.3 for HTTPS and secure VPN tunnels. This protects the data as it moves between users, applications, and your cloud services. Cloud providers like AWS and Azure have native encryption services for their storage and databases, make sure those are turned on by default. You need to review your data classification policy to know what’s sensitive and then go verify that it’s all being encrypted properly.
Pro Tip: Key Management System (KMS)
Don’t get sloppy with your encryption keys. Centralize and secure them with a proper Key Management System (KMS). A KMS makes sure keys are managed, rotated, and protected from being stolen, which is honestly where a lot of encryption strategies fall apart.
Common Mistake: Default Encryption Settings
Just because a vendor provides default encryption settings doesn’t mean they’re good enough for your organization. Default settings might not meet your specific security or compliance needs. Always review and customize your encryption configurations to match industry best practices. The threat environment is always changing, and tech policy shifts are only accelerating it, so you have to be proactive and build security in layers. By actually implementing and constantly tweaking these core practices, organizations can seriously strengthen their defenses against the most common attacks, protecting their operations and their data.
What is adaptive multi-factor authentication?
Adaptive MFA is just MFA with a brain. It analyzes contextual information like your location, the device you’re using, and your typical behavior to decide if it needs to ask for more proof you are who you say you are. This dynamic approach adjusts the security challenge based on the perceived risk of each login attempt, so a low-risk login is easy and a high-risk one is much harder.
How often should vulnerability assessments be conducted?
You should run vulnerability assessments at least every quarter across your whole IT environment. For your most critical systems or in places where things change a lot, you should scan continuously or at least monthly. The goal is to find and fix new weaknesses before someone else does.
What is the difference between EDR and traditional antivirus?
Traditional antivirus mostly just matches files against a list of known malware signatures. It’s very reactive. EDR (Endpoint Detection and Response) goes way beyond that by constantly monitoring endpoint activity, collecting data, and using behavioral analysis and threat intelligence to spot and respond to both known and unknown threats, including the nasty stuff like fileless attacks and APTs.
Why is an Incident Response Plan (IRP) important?
An IRP is important because your security will eventually fail. It’s just a matter of when and how. A good IRP gives you a playbook for identifying, containing, and recovering from security incidents. It’s what minimizes the damage from a breach, gets you back in business faster, and ensures you don’t make the same mistake twice.
What type of encryption should be used for sensitive data?
For sensitive data at rest (on a hard drive or in a database), the standard is a strong symmetric algorithm like AES-256. For data in transit (moving over a network), you need to use secure protocols like TLS 1.3 for all connections. The exact implementation will depend on what the data is and where it lives, but the objective is always the same: make the data unreadable to anyone who shouldn’t have it.